Boat Windows - Double Glazing for Boats
Share
Narrow Boat Window - White Upvc Double Glazed Boat Windows
Our Slimline Marine Boat Windows have reduced sight lines and a back to front depth of 48mm, perfectly suited to accommodate narrower wall construction found in Canal Boats & Barges
The slim-line odd leg section sits on the external face of the building, giving a coverage of 19mm on all sides. A non-drying beading sealant is used around the external overlap, which when compressed during installation stage, becomes watertight and fills in any gaps within the external cladding giving a clean finish.
The window comes factory glazed with externally toughened security glass on double sided security tape. This means that the glass can only be changed with access to the inside for added security.
Benefits - no condensation ✅ no maintenance ✅ thermal efficient ✅ choice of any colour ✅ easy to install ✅ noise reduction ✅
Measuring:
Always measure from inside.
Remove any internal trim around the window to reveal the existing window. Simply measure the existing window. If the existing window is a very tight fit, reduce the overall size by 5mm to allow for easy installation. Do not worry if you have rounded corners, these can easily squared off using a hand held oscillating saw. The corners do not need to be 'professionally squared' as the external overlap of the upvc window frame will cover the corners and therefore will not be seen.
Installation:
The windows can be two ways dependent on the finish you require.
1) Aluminium Fixing Kit: Installed by knocking an aluminium fixing bar into the specially designed window, giving a secure clamp fix finish. The fixing bar then doubles up as an internal trim which sits flush to the inner wall. This is suitable for wall construction of 38mm or 53mm. The fixing kit cost and additional £20 for this window. Please contact us with any questions.
2) Screw Fix: If your wall construction differs than the above wall thickness, or you'd prefer to trim the internal surround of the window with the existing timber or an new timber beading then you can fix them using screw fix through the depth of the window frame into the timber subframe of the window. Simply open the vent and screw through the frame
You will need to seal the odd leg frame (external lip) with non drying sealant silicone. As the boat is constantly moving, if you use standard silicone, it will crack and leak over time.
Other products:
Please see our company page for other boat window sizes / designs we sell. Our upvc boat doors are extremely popular. Our doors come with adjustable hinges so you can adjust the doors if they catch. Multi point locking system is installed as standard for security peace of mind.
Lead Time:
Our products are manufactured to order. Our manufacturing time for white windows / doors are within 3 weeks & painted windows 4 weeks from order confirmation.
Condition is New. Collection in person. We do offer an in house delivery service. Please email us the delivery postcode and we will send you the price.